مبدل سریال به WiFi مدل CSW-M83

توضیحات

CSW-M83 is an embedded serial to WiFi module that conforms to IEEE 802.11b/g wireless standards. This serial to WiFi module provides your industrial equipment with seamless wireless network connectivity via UART to help you control and monitor serial devices from anywhere over WiFi. Applying CSW-M83, therefore, not only you can reduce cost and risk, but shorten development time to add wireless LAN network capabilities. This serial to WiFi module keeps you free from unnecessary wiring and RF approval because you can mount a pre-approved ralink RT3070/RT5370 USB wireless LAN dongle. With infrastructure and Ad-hoc network provided, this embedded serial to WiFi module can be used for various environments such as POS System, Automobile Diagnosis, Survival Game, etc.

Benefits & Features

* Supported over firmware version 2.2B

1- 3.3V logic level UART to WiFi module

2-IEEE 802.11 b/g

3- Infrastructure and Ad-hoc network

4-  A Ralink RT3070/RT5370 USB Wireless LAN dongle required

5- 1 x UART (up to 230,400bps)

6- IPv4 / IPv6 dual stack *

7- Stateless / Stateful (DHCPv6) address auto-configuration *

8- Separator settings for packet fragmentation *

9- Soft AP (setting and connection through a smartphone or laptop without an AP available) *

10- Wireless Received Signal Strength Indication (RSSI) Mode *

11- Setting up main parameters(IP, SSID and security functions related to WiFi) on the Web *

12- WPA Enterprise (EAP-TLS, EAP-TTLS, PEAP) *

13 – Wireless LAN Security protocol : WEP, WPA-PSK(TKIP), WPA2-PSK(AES)